INTRODUCTION FEEDBACK
CONTACT US HOME
THE ' ADVANCE' PRESSES ARE ACCOURATELY & ECONOMINALLY OPERATING MACHINES WITH THE FOLLOWING ADVANTAGES:

SERVICE COUNT AS WELL AS TECHNOLOGY

Our customers are our best sales force, it is their reputation/ success which influences other companies to choose Advance. In our specialised field there is probably no company more innovative. We are still small enough to provide that personal attention, but large enough to work closely with customers on development and new project. A visit to our works invariably generates new ideas and could be time well spent.
Frame Press
Crank Presses
Motion Presses
Joint Press

 


LESS MAINTENANCE

The Hp-2 design results in much less press maintenance cost and dramatically lower die wear. When you spend lacs of Rupees on precision progressive dies, your beat insurance is a Advance High Production Press.
FRAME-
Welded Steel Construction, stress Relieved, Computer aided frame design, extreme rigidity with uniform parallel deflection, idea for progression Tolling.

SLIDE-
Eight - Point, square comer gibbing provides ling parallel guiding surfaces that maintain slide parallelism under off centre load resulting increase of precision tolling life. The slide is fitted with replaceable bronze liners. The Gib Adjusting points are easily accessible.

LUBRICATION-
Motorised forced feed lubrication is of RE-CIRCULATING type ensures adequate oil supply, depending upon the Bearing area ensures cooling of Bearing as well as any fault in the system will cause instant stopping of the press and will be shown optically on control panel.

ECCENTRIC SHAFT-


It is obtain from a forged piece of carbon steel. Prior to machining, the shaft undergoes an ultra-sound inspection along with chemical and metallographic test. Shaft is ground finished on bearing surfaces. All main and Pitman Bearing are of Heavy Walled Nickel Phosphorous and Bronze. Which are hand scrapped.

SLIDE COUNTER BALANCE-

Pneumatic counter balances are provided to counter the weight of the slide and tooling, which help taking up the bearing clearances and ease slide adjustment, as well as smooth movement of the slide and effective braking.

PNEUMATIC CLUTCH-BRAKE-
The single -disc has the advantage like; a continuous jolt-free stroke, no adjustment is needed to correct wear on the facings, It is self-ventilating, which increases its performance, It's operation is safe and fast, etc.

ELECTRICAL-
Variable speed drive for quick selection of Speed. Electrical control system incorporates the essential safety requirements and parallel operation control station on the machine facilitates toll setting, continuous operation and T.D.C. stop.

FLYWHEEL-
The Flywheel is dynamically Balanced, Quill mounted and run on antifriction bearings.

Specification - High Production Presses
Capacity at 20^ before BDCAt maximum storke Tonne 25 40 63 63 100 160 200 250
No. of suspension points mm 1 2 1 2 2 2 2 2
Stroke Fixed - standard mm 20 20 25 25 25 40 40 40
Optional Stroke fixed-max(at accepted speed) mm 50 50 50 50 50 80 100 100
Shut Higher from table to slide face with slide down adjustment up mm 355 355 425 400 450 500 560 560
Slide Adjustment mm 50 63 63 63 100 100 100 100
Table & bolster area LR mm 500 630 450 800 1300 1600 1600 1600
FB mm 500 500 630 630 800 800 800 800
Slide face area LR mm 500 630 450 800 1120 1600 1600 1600
FB mm 500 400 280 500 500 800 630 630
Table opening LR mm 400 500 180 710 1000 1400 1400 1400
FB mm 180 224 290 250 250 320 320 320
Opening in uprights FBxHt mm 200x250 250x250 250x215 280x260 280x215 360x380 360x410 360x410
SpeedVariable Min SPM 100 100 125 100 100 100 100 100
Max SPM 600 500 250 500 400 300 250 200
Height of Table from floor mm 800 800 800 800 1000 1000 1000 1000
Bolster thickness mm 63 63 85 80 115 150 180 180
Main motor power kw 5.5 7.5 5.5 11 25 25 30 30
Air supply bar 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
Electrical supply 415v. 3C 50 Hz

STANDARD OPTION
(Most Often Specifiled)

  • TONNAGE MONTORING DEVICE
  • HYDRAULIC OVER LOAD SAFETY
  • CRANK ANGLE INDICATOR
  • PROGRAMMABLE LIGICAL CONTROL
  • MESSAGE DISPLAY
  • TEMPERATURE SCANNER
  • SHUT HEIGHT INDICATOR
  • PRE-SET DOWN COUNTER
  • QUICK DIE CHANGE SYSTEM
  • COIL FEEDING EQUIPMENT
  • MOTORISED SLIDE ADJUSTMENT
  • PHOTO ELECTRIC GAURDE
  • DIE SPACE LIGHT
  • DIE SPACE ENCLOSURES

STANDARD FEATURES

  • VARIABLE SPEED EDDY CURRENT DRIVE
  • AIR COUNTER BALANCE
  • RE-CIRCULATING MOTORISED LUBRICATION SYSTEM
  • DUAL SOLONOID VALVE
  • FLY WHEEL BRAKE
  • MICRO-INCHING
  • OPERATING PANEL ( Self Standing)
  • SHEAR PLATE SAFETY,INTERLICKED WITH PRESS OPERATION
  • PROGRAMMABLE ROTARY LIMIT SWITCHES
  • 8 POINTS GIBBING
  • PRODUCTION COUNTER

Web Site Designing, Web Site Hosting & Maintainence, catered by
Jingle Info Solutions New Delhi, India.

© http://www.advancepackaging.com