ECCENTRIC SHAFT : It is obtained from a forged piece of carbon steel. Prior to the machining, the shaft undergoes an ultra-sound inspection and a chemical and metallographic test, Shaft is ground finished on Bearing surfaces, all main Bearings are of Heavy Walled Nickle phosphorous Bronze, which are hand scrapped.

SLIDE : Graded cast Iron Slide, runs on six independent extra ling gibs with replaceable liners, bearing clearance bronze on the gibs are easily adjustable. The massive slide presents wide area and long gibs providing high degree of centering and rigidly at extension of the adjustment.

ELECTRICAL CONTROLS : A lockable selector switch of ONCE, INCH and CONTINUOUS mode of operation is provided. The press is equipped with a highly reliable Dual Solenoid Valve, which prevents faulty operation by electrical lockout. 'Top Stop' to stop the press at Top Dead Centre. Two Hand Engagement Device, Emergency Stop' are some of the other standard features. The electric equipment is in line with the latest safety.

SLIDE COUNTER BALANCE : Pneumatic counter balancers are provided to counter the weight of the slide and toolings, which help in taking up the bearing clearances and ease slide adjustment, as well as smooth movement of the slide and effective braking.

PNEUMATIC CLUTCH-BRAKE : The single-disc clutch has the advantages like; a continuous joit-free stroke, no adjustment id needed to correct wear on the facings, it is self-ventilating which increases it performance, its operation is safe and fast, etc.

LUBRICATION : The Automatic Lubrication of all moving parts of the machine is controlled by a central pump through capillary distributive system.